Sea-Doo Elite Traction Mat RXT-Is / GTX Ltd. 09
Processing...
Brand: BlackTip Jetsports
Code: 130BE115
Quantity in Basket: None
Price: $174.95

Click on the images below to build your traction mat.

Qty

BlackTip Jetsports Elite traction mats are unlike anything the PWC industry has ever seen. With more color and pattern choices available than ever before. With the Elite series you are in control. You are no longer limited to pick from just the standard cuts and colors. You pick your pattern and then pick the top color and bottom color of your mats. The bottom color will show through when we finish cutting the pattern for your specific watercraft. The Elite series mats are made from the same high quality material as our standard mat kits and also include our high strength PSA.

*Please note - Elite Mats will be charged as soon as we get the order and before they are made (due to our inability to resell Custom/Elite mats). Once charged, you order will not be refunded. 

2012 GTX S 155
2013 GTX S 155
2014 GTX S 155
2015 GTX S 155
2016 GTX S 155
2017 GTX S 155

2011 GTX Is 215
2010 GTX Is 215

2009 GTX Ltd IS 255
2010 GTX Ltd IS 260
2011 GTX Ltd IS 260
2012 GTX Ltd IS 260
2013 GTX Ltd IS 260
2014 GTX Ltd IS 260
2015 GTX Ltd IS 260
2016 GTX Ltd IS 260

2009 RXT IS 255
2010 RXT IS 260
2011 RXT IS 260
2012 RXT IS 260

2011 RXT aS X/ aS XRS 260
2012 RXT-X aS 260
2013 RXT aS 260
2014 RXT-X aS 260
2015 RXT-X aS 260 2016 RXT-X aS 260
Watercraft Superstore's BlackTip Jetsports traction mats have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains due to user negligence. We do our best to make sure every traction mat set is perfect, but sometimes things happen.

If you should have a problem, please contact SBT @877.330.0231or sales@sbt.com to identify your issue.
Removal of original riveted mats :Drill the heads off of the rivets holding down the original mats while pushing the remaining rivet into the hull. Fill the holes left by the rivet with 5min. epoxy, this can be purchased locally at any auto parts store. Make sure to scrape the epoxy flat in the foot wells so the new mats will lay flush. Clean the area that the new mats will be attached to with acetone solvent for proper adhesion.

Removal of original glue down mats:By hand, peel off any old mat material that you are able to and then you use a putty knife to help remove all material from the difficult areas. Areas that are difficult may require spraying WD-40 brand lubricant in between the mat and hull to help loosen the old adhesive. Take your time on the prep work; this is important to achieve professional results.

Now that your surface is clean and ready for the new mats it is time to lay out how your mats will look in the foot wells. This is the location the mats will be attached. Trace around the mats using a pencil. This is your reference area to place the mats after the paper is peeled off the back of the mat.

Peel off the paper backing from the mat and line up one end of the mat to your traced out area. (Do Not Try to Install the complete mat in one shot) Slowly work the mat down into your outline.

After the entire mat is installed you must apply even pressure down on top of the mat to insure complete contact to the hull.

Let mats sit for 12 hrs after the install so the glue will fully cure.
Lead time for shipping is 5-7 business days.