Custom Storage Cover For Yamaha FX SHO/Cruiser SHO 2008-2011 / FX HO/FX Cruiser HO 2008-2011
Each of our custom storage covers are made from a very high end 600 Denier solution dyed polyester to resist fading and dry rot. We use only the highest quality thread that is designed to withstand the harsh UV rays from the sun without it deteriorating. Each cover is custom fitted to your specific year, make and model watercraft so you know it will have a great look whether sitting on your dock or traveling down the road on your trailer. All covers have a shock cord sewn into the hem and include adjustable tie down straps for added security while trailering.
Custom storage covers are sewn to order and usually ship in 48-72 hrs. Being a custom product there are no returns accepted. Covers have a 1 year warranty against any defects in material or workmanship.
Contact SBT's sales team or email us at Sales@shopSBT.com for further assistance.
Color samples may be sent to you upon request or viewed by clicking HERE
2008 FX CRUISER SHO
2009 FX HO
2009 FX SHO
2009 FX CRUISER HO
2009 FX CRUISER SHO
2010 FX HO
2010 FX SHO
2010 FX CRUISER HO
2010 FX CRUISER SHO
2011 FX HO
2011 FX SHO
2011 FX CRUISER HO
2011 FX CRUISER SHO
If you should have a problem or questions, please contact SBT @877-330-0231 or sales@SBT.com
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.
If the craft is going to be towed ro is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.
You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.
If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.