GP760 /1998-2000 GP 800 /GP1200/1997-1999 GP 700 Storage Cover
Description
A good storage cover is
essential to protect your Yamaha watercraft while it is stored.
Our cover is made of 600D solution dyed polyester, which
means the color goes all the way through and is much more fade resistant that
other covers. Each Yamaha Jet Ski cover comes with a tie down strap kit for
trailering locally.
The Yamaha covers work great for indoor and outdoor storage
applications and the 600D material is breathable to help prevent mildew growth
and allow moisture to evaporate.
All Yamaha covers come in a Black and Gray 2 tone color
pattern.
Yamaha covers have a 1 year warranty against defects in
workmanship or material.
Applications1997 GP 1200
1997 WAVE RUNNER 760
1998 GP 1200
1998 GP 800
1998 WAVE RUNNER 760
1999 GP 1200
1999 GP 760
1999 GP 800
1999 WAVE RUNNER 760 GP 760
2000 GP 760
2000 GP 800
1997 WAVE RUNNER 760
1998 GP 1200
1998 GP 800
1998 WAVE RUNNER 760
1999 GP 1200
1999 GP 760
1999 GP 800
1999 WAVE RUNNER 760 GP 760
2000 GP 760
2000 GP 800
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.The watercraft should always be clean before installing any cover to prevent damage to the finish.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
Video