Custom Storage Cover for Yamaha VX VXR VXS 2010-2014 V1 V1 Sport 2015-2016

Custom Storage Cover for Yamaha VX VXR VXS 2010-2014 V1 V1 Sport 2015-2016
Processing...
Brand: Watercraft Superstore
Code: 111WS421-C
Quantity in Basket: None
Price: $179.95



Qty
Description

Each of our custom storage covers are made from a very high end 600 Denier solution dyed polyester to resist fading and dry rot. We use only the highest quality thread that is designed to withstand the harsh UV rays from the sun without it deteriorating. Each cover is custom fitted to your specific year, make and model watercraft so you know it will have a great look whether sitting on your dock or traveling down the road on your trailer. All covers have a shock cord sewn into the hem and include adjustable tie down straps for added security while trailering locally.

Custom storage covers are sewn to order and usually ship in 48-72 hrs.

Being a custom product there are no returns accepted. Covers have a 1 year warranty against any defects in material or workmanship.

Contact SBT's Sales Team or email us at Sales@shopsbt.com for further assistance. 

Color samples may be sent to you upon request or viewed by clicking 
HERE

Applications2010 VX CRUISER
2010 VX DELUXE
2010 VX SPORT
2011 VXR
2011 VX DELUXE
2011 VX SPORT
2011 VXS
2011 VX CRUISER
2012 VXR
2012 VX DELUXE
2012 VX SPORT
2012 VXS
2012 VX CRUISER
2013 VXR
2013 VXS
2013 VX Deluxe
2013 VX Sport
2013 VX CRUISER
2014 VXR
2014 VX Deluxe
2014 VX Sport
2014 VXS
2014 VX CRUISER
2015 V1
2015 V1 Sport
2016 V1 Sport
2016 V1
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.
Video