Custom Storage Cover for Yamaha FX/FX HO/FX Cruiser/FX Cruiser HO 2004-2008

Custom Storage Cover for Yamaha FX/FX HO/FX Cruiser/FX Cruiser HO 2004-2008
    Brand: WCSS
    SKU #: 111WS413-C
    Quantity in Basket: None

    I acknowledge that this is a custom made storage cover and that there are no refunds or exchanges. We suggest you order swatches prior to placing your order.


    A good storage cover is essential to protect your Yamaha PWC while it is stored.
    WaterCraft Superstore makes an excellent Custom Storage Cover for just that purpose. 
    Just select your color preferences and we can custom make your cover to look the way you want it. 
    *Please be sure that your specific model is listed in the applications tab as these covers are non-returnable*

    Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and 
    is much more fade resistant than other covers. Each Yamaha Wave Runner PWC storage cover comes with a tie down strap kit 
    for trailering and a storage bag to keep your Yamaha PWC storage cover in while you are out riding. 

    The Yamaha PWC storage cover works great for indoor and outdoor storage applications and the 600D material is breathable
    to help prevent mildew growth and allow moisture to evaporate. 

    Applications2004 FX Cruiser
    2004 FX Cruiser HO
    2005 FX Cruiser
    2005 FX Cruiser HO
    2006 FX
    2006 FX HO
    2006 FX CRUISER
    2006 FX CRUISER HO
    2007 FX
    2007 FX HO
    2007 FX CRUISER
    2007 FX CRUISER HO
    2008 FX HO
    2008 FX
    2008 FX CRUISER
    2008 FX CRUISER HO
    WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

    If you should have a problem, please contact SBT @877.330.0321 or
    InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

    The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

    If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.
    Product Reviews