Storage Cover for Sea-Doo 2006-2011 GTI 130, GTI SE 130/155 / 2009 Wake 155

Description
Applications2006 GTI RENTAL
2006 GTI SE
2006 GTI STD
2007 GTI 130
2007 GTI RENTAL 130
2007 GTI SE 130
2007 GTI SE 155
2008 GTI 130
2008 GTI RENTAL 130
2008 GTI SE 130
2008 GTI SE 155
2009 GTI 130
2009 GTI RENTAL 130
2009 GTI SE 130
2009 GTI SE 155
2009 WAKE 155
2010 GTI 130 & RENTAL
2010 GTI SE 130
2010 GTI SE 155
2006 GTI SE
2006 GTI STD
2007 GTI 130
2007 GTI RENTAL 130
2007 GTI SE 130
2007 GTI SE 155
2008 GTI 130
2008 GTI RENTAL 130
2008 GTI SE 130
2008 GTI SE 155
2009 GTI 130
2009 GTI RENTAL 130
2009 GTI SE 130
2009 GTI SE 155
2009 WAKE 155
2010 GTI 130 & RENTAL
2010 GTI SE 130
2010 GTI SE 155
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
Video