Storage Cover for Sea-Doo 260 RXT iS RXT-X aS GTX Ltd iS GTX S GTX S 155

Storage Cover for Sea-Doo 260 RXT iS RXT-X aS GTX Ltd iS GTX S GTX  S 155
Brand: Watercraft Superstore
Code: 111WS118
Quantity in Basket: None
In Stock ETA: 5-7 business days
Price: $138.95



A good storage cover is essential to protect your Yamaha watercraft while it is stored.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Yamaha Jet Ski cover comes with a tie down strap kit for trailering locally.

The Sea-Doo covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All Sea-Doo covers come in a Black and Gray 2 tone color pattern.

Sea-Doo covers have a 1 year warranty against defects in workmanship or material.

Applications2012 GTX S 155
2013 GTX S 155
2014 GTX S 155
2015 GTX S 155
2016 GTX S 155
2017 GTX S 155

2011 GTX Is 215
2010 GTX Is 215

2009 GTX Ltd IS 255
2010 GTX Ltd IS 260
2011 GTX Ltd IS 260
2012 GTX Ltd IS 260
2013 GTX Ltd IS 260
2014 GTX Ltd IS 260
2015 GTX Ltd IS 260
2016 GTX Ltd IS 260
2017 GTX Ltd IS 260

2009 RXT IS 255
2010 RXT IS 260
2011 RXT IS 260
2012 RXT IS 260

2011 RXT aS X/ aS XRS 260
2012 RXT-X aS 260
2013 RXT aS 260
2014 RXT-X aS 260
2015 RXT-X aS 260
2016 RXT-X aS 260
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

If you should have a problem, please contact SBT @877.330.0321 or
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.