Storage Cover for Yamaha 1994-1997 Wave Raider 700/760/1100
Description
A good storage cover is essential to protect your Yamaha watercraft while it is stored.
Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Yamaha Jet Ski cover comes with a tie down strap kit for trailering locally.
The Yamaha covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.
All Yamaha covers come in a Black and Gray 2 tone color pattern.
Yamaha covers have a 1 year warranty against defects in workmanship or material.
Applications1994 WAVE RAIDER 700
1995 WAVE RAIDER 1100
1995 WAVE RAIDER 700
1995 WAVE RAIDER 700 DELUXE
1996 WAVE RAIDER 1100
1996 WAVE RAIDER 700
1996 WAVE RAIDER 760
1997 WAVE RAIDER 700
1995 WAVE RAIDER 1100
1995 WAVE RAIDER 700
1995 WAVE RAIDER 700 DELUXE
1996 WAVE RAIDER 1100
1996 WAVE RAIDER 700
1996 WAVE RAIDER 760
1997 WAVE RAIDER 700
WarrantyWatercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com
InstallationYour new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.The watercraft should always be clean before installing any cover to prevent damage to the finish.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.
If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
Video