Description
|
Introducing a new look with a fresh Blacktip Jetsports Premium Seat Cover!
Please note,There are no refunds or exchanges on any seat covers that have been installed. If you need assistance choosing colors for your seat cover, please contact a member of our SBT Sales Team and we would be glad to help you, toll free 877.330.0231 or you may email us Sales@ShopSBT.com BlackTip Jetsports Seat Cover Color Samples may view differently than actual color, depending on monitor settings. **Seat Cover does not include the strap** |
installation guides & downloads
CleaningCleaning and Maintenance of the seat cover should be done periodically to help extend the life of the cover. To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush. You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material. |
Product TypeBlackTip Jetsports |
Fits the items below
Click the + on each item to expand the model(s) for that brand / year.
2014 Sea-Doo
2014 Sea-Doo Spark 3Up2015 Sea-Doo
2015 Sea-Doo Spark 3Up2016 Sea-Doo
2016 Sea-Doo Spark 3Up2017 Sea-Doo
2017 Sea-Doo Spark 3Up 2017 Sea-Doo Trixx 3Up2018 Sea-Doo
2018 Sea-Doo Trixx 3Up 2018 Sea-Doo Spark 3Up2019 Sea-Doo
2019 Sea-Doo Trixx 3Up2020 Sea-Doo
2020 Sea-Doo Trixx 3Up2021 Sea-Doo
2021 Sea-Doo Trixx 3Up2022 Sea-Doo
2022 Sea-Doo Trixx 3Up 2022 Sea-Doo Trixx 3UpInstallation Guides & Downloads
|
Installation of your new seat cover is easy and can be done by most do it yourselfers. Listed below are the tools and supplies you will need: Staple Gun (preferably electric or air powered) Stainless Steel staples to fit your gun Needle nose pliers Flat blade screwdriver or other type of tool to pry out staples Scissors Utility knife Some seats have straps, handles, or brackets they may require additional tools for removal. Most BlackTip Jetsports seat covers are designed to install over your factory cover. The old cover may need to be removed or sections of it removed if it is torn or damaged. If the original is badly damaged or the seat foam is wet you should remove it completely and let the foam dry before installing the new cover. If the foam is damaged you will need to repair it before installing the new cover or the damage will show through. Small cracks can usually be repaired with duct tape to hide the damage. Larger repairs can be made by replacing the damaged foam and then sanding the new foam to match the shape of the old foam. If your seat has extensive damage we recommend taking it and your new cover to a local upholstery shop. Installation of the cover is easiest if the vinyl is warm, a nice sunny day, a warm shop, or a hair dryer can accomplish this. Make sure you do not have any sharp corner or protrusions before installing. Align the cover onto the seat so that it is centered over the main section of the seat. Put a staple at each corner or curve including the front of the seat (these staples may need to be removed later as you stretch the material into place). Once you have the material aligned you can continue stretching and fitting the cover around the seat. As you staple and stretch it may be necessary to trim away excess material. You will want to use many staples around the perimeter of the seat use the original as your guide. After the cover is completely stapled in place you should trim away any excess material. On some models with a strap you can reinstall the strap at this time if you prefer. |
Warranty
|
BlackTip Jetsports seat covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains due to user negligence. We do our best to make sure every seat cover is perfect, but sometimes things happen. If you should have a problem, please contact SBT @877.330.0321 or sales@sbt.com to identify your issue. |